Category: how to make limestone granules


How to use drum granulator to make 30 t/h limestone pellets


Introduction

The drum granulator is a widely used piece of equipment in the production of limestone pellets. It is capable of producing 30 t/h of high-quality pellets, making it an essential tool for large-scale limestone pellet production. In this guide, we will discuss the steps to use a drum granulator to make 30 t/h limestone pellets.

Preparation of Raw Materials

Before using the drum granulator, it is essential to prepare the raw materials. Limestone needs to be crushed into a fine powder and mixed with any necessary additives such as binders or water. The mixture should be homogeneous to ensure that the pellets are of uniform size and quality.

Setting up the Drum Granulator

The rotating drum granulator equipment should be set up according to the manufacturer’s instructions. It is important to ensure that the machine is level and stable before use. The drum should be rotated at the recommended speed, and the angle of the drum should be adjusted to ensure that the pellets are formed correctly.

Feeding the Mixture into the Drum

Once the drum granulator is set up, the limestone mixture can be fed into the drum. The mixture should be added gradually to ensure that the pellets are formed evenly. It is important to monitor the flow of the mixture to prevent overloading the drum and affecting the quality of the pellets.

Forming the Pellets

As the drum rotates, the mixture will begin to form into pellets. The rotation of the drum causes the mixture to roll and tumble, which helps to form the pellets. The size and shape of the pellets can be adjusted by changing the speed of the drum and the angle of the drum.

limestone pellets granulating production plant

limestone pellets granulating production plant

Drying the Pellets

After the pellets have been formed, they need to be dried to remove any excess moisture. The drying process can be done using a rotary dryer or a fluidized bed dryer. The pellets should be dried to the desired moisture content to ensure that they are of high quality.

Quality Control

It is important to monitor the quality of the pellets throughout the production process. Samples should be taken regularly to check the size, shape, and moisture content of the pellets. Any adjustments to the drum granulator or the drying process should be made based on the results of the quality control tests.

Conclusion

Using a drum granulator to make 30 t/h limestone pellets is a straightforward process if the proper steps are followed. By preparing the raw materials, setting up the drum granulator correctly, feeding the mixture into the drum, forming the pellets, drying the pellets, and performing quality control, high-quality limestone pellets can be produced efficiently and effectively.

Our Reader Score
[Total: 0 Average: 0]

How to produce 30 t/h limestone pellets


 

Introduction to Limestone Pelletizing

Limestone pellets are a product of agglomerating limestone fines into a larger, more manageable size that can be used in various applications such as soil conditioning and water treatment. Producing high-quality limestone granules is essential in industries ranging from agriculture to manufacturing. The following is a comprehensive guide on how to produce limestone pellets at a rate of 30 tons per hour (t/h).

Understanding the Raw Material

Before the pelletizing process begins, it’s crucial to understand the characteristics of the limestone that will be processed. The chemical composition, moisture content, particle size distribution, and the physical properties of the limestone all play a vital role in determining the efficiency of the pelletizing process and the quality of the final product.

Subsection: Preparing the Limestone Fines

The raw limestone must be crushed and ground into a fine powder. The optimal size for pelletizing is typically around 80-100 mesh. Proper sizing of the raw material helps ensure that the pellets are strong and durable.

The Pelletizing Process

The pelletizing process for limestone involves several steps, each critical to producing high-quality pellets at the desired throughput rate.

Subsection: Mixing

The first step in the pelletizing process is to thoroughly mix the limestone fines with any required additives. Additives can include binders, such as bentonite or organic binders, which help the pellets retain their shape during processing and use.

Subsection: Feeding the Pelletizer

A consistent feed of the limestone mixture is essential for producing uniform pellets. The feed rate must be controlled to match the capacity of the pelletizer, which, in this case, is 30 t/h.

Subsection: Pelletizing

The limestone mixture is then fed into a pelletizing machine, such as a disk granulator or a rotary pelletizer. As the equipment rotates, the limestone fines are rolled into small, round pellets. The motion and forces within the pelletizer, combined with the moisture and binder, cause the fines to become sticky and agglomerate into pellets.

Subsection: Sizing and Screening

After the initial pelletizing, the pellets are screened to remove any that are too large or too small. Oversized pellets can be crushed and recycled back into the process, while undersized material (fines) can be re-pelletized.

Drying and Cooling

Once pelletizing is complete, the pellets must be dried to a suitable moisture content to ensure they are strong and durable. The drying process typically involves a rotary drying machine, where the pellets are exposed to a stream of hot air that evaporates excess moisture.

Subsection: Drying

In this step, the moisture content of the pellets is reduced to the desired level, which is typically below 5%. This ensures that the pellets are not too brittle and will not break down during handling, storage, or use.

Subsection: Cooling

After drying, the pellets need to be cooled to a temperature suitable for storage and handling. Cooling is usually done using a rotary cooler, where ambient air or cooled air is passed through the pellets to bring down their temperature.

Quality Control and Storage

Quality control is a critical component in the production of limestone pellets. Once the pellets are cooled, they must be tested for various parameters such as size, strength, and moisture level. These parameters ensure that the pellets meet the required specifications for their intended use.

Subsection: Quality Assurance

Regular sampling and testing of the pellets should be conducted to ensure consistent quality. Adjustments to the process may be required based on test results to maintain the desired pellet quality.

Subsection: Storage

Once approved, the pellets are stored in silos or stockpiles, ready for shipment or use. Proper storage is necessary to protect the quality of the pellets from environmental factors such as moisture and extreme temperatures.

Conclusion: Optimizing for Efficiency and Quality

Producing 30 t/h of high-quality limestone pellets requires a well-designed process that is optimized for both efficiency and the final product’s quality. By carefully controlling each step of the process, from raw material preparation to pelletizing, drying, and cooling, producers can ensure that their limestone pellets meet the needs of their customers and the demands of the market. If you want to set up a 30 t/h limestone granulation plant, we can offer for you the best solution.

 

Our Reader Score
[Total: 0 Average: 0]




Categories